1. Establish a location for your new unit. This surface mounted ironing board is designed to be attached to the center of a stud by the screws provided.

2. Set the bottom of the Model 168 24" from the floor over the center of a wood stud. This will give you a 36" ironing height. If you want to adjust to another height, you may.

3. Attach the ironing center to the wall with one of the provided 4" screws and washer.

4. Plumb the ironing center and attach the bottom of the board with the other 4" screw and washer provided.

5. Insert the 1" buttons over the 1" holes at the top and bottom of the unit.

©2007 HideABoard.com